How to use your Dyson fan heater

	Standby ON/OFF		Cool mode
	Airflow speed control		Thermostat control
	Sleep timer		Oscillation ON/OFF
	Personal heating mode		Diffused mode

Operating your Dyson fan heater

1. To operate, point the remote control toward the front of the base and press the standby ON/OFF button.
   Alternatively press the standby ON/OFF button on the main body.
2. Attach the remote control to the top of the appliance with the buttons facing down.

Heating mode

• Press the red thermostat control button until the digital display shows the desired target temperature.
• The power button light will change from blue to red.
• The red circle will disappear when the target temperature has been reached.

Cool mode

• Press the blue thermostat control button to change the target temperature to 0°C.
• The power button light will change from red to blue.
• To adjust the airflow speed use the airflow control button.

Oscillation control

• To start the appliance oscillating, press the oscillation control button.
• To stop the appliance oscillating, press it again.

NB: The appliance will not oscillate when the control buttons are pressed.

Airflow speed control

• To change the airflow speed press the airflow control button.
• The digital display will show the new speed; after 3 seconds it will change back to the target temperature.

Diffused heating mode

• Press the wide angle button to change from personal heating to whole room heating.
• Carefully hold the base and the main body. Tilt the amplifier forward or backward for the required airflow angle.
• Heating and cool modes work in this mode.

Personal heating mode

• Press the narrow angle button to change from whole room heating to personal heating.
• Heating and cool modes work in this mode.

How to use the tilt function

• Carefully hold the base and the main body. Tilt the amplifier forward or backward for the required airflow angle.

How to use the sleep timer

• To set the sleep timer, press and hold the timer button to select the desired time.
• When time reaches zero, the appliance will go into standby mode.
• To cancel, reduce the time until two dashes appear.

• Back