Check wheel carriage plates

Check that the wheel carriage plates are screwed together correctly.

• Ensure the heat sink arm is at the top of the upright before removing. Failure to do this will cause the weight to drop.
• Hold the heat sink arm at all times when removing from the upright.
• Remove the three screws and remove the heat sink arm from the upright.

• Ensure the red tape has been removed from the mounting plates.

• Align the square shapes and screw holes on the heat sink arm and the upright.
• Press the two parts together with one hand.

• Loosely screw in the three screws.
• Recheck alignment.
• Proceed to screw until securely clamped.

Has checking the wheel carriage plates resolved the problem?

• Yes
• No
• Back