Check the mini turbine head step 2
DC07 Brush Control
DC07 Brush control

Contact us

Our customer care team is available Mon-Fri from 8:00am to 6:00pm and Sat-Sun 8:30am - 4:00pm AEST.

Please note: Our Contact Centre is experiencing heavy call volumes and we apologise for the delay. We are working to bring our wait times back to normal as quickly as possible.

 

Check the mini turbine head step 2

  • Remove each side of the brushbar by sliding each half out from the sides of the mini turbine head.
  • Clear any thread and debris.
  • Check both of the metal shafts for blockages and ensure that they rotate freely by hand.
  • Inspect the duct on the underside of the turbine head for blockages and remove if necessary.
  • Check the outside surface of the plunger for fluff and debris and remove if necessary.

When replacing the brushbars please ensure that both of the arrows on the brushbars are pointing in the same direction, towards the rear of the tool.

diagram showing how to remove brushbar diagram showing how to clean brushbar

Has this resolved the problem?