Step by step guide

• Ensure the machine is not in the charger.
• Separate the cyclone assembly and the main body of the machine by pressing the catch on the cyclone assembly and pulling them apart.
• Remove the filter from the main body.

• Soak the filter in cold water for at least 5 minutes. (Please do not use detergent, wash in a dishwasher or washing machine).
• After 5 minutes rinse the filter under cold running water and squeeze gently, repeating until the water runs clear.

• Leave the filter to dry in a warm place for at least 12 hours or until completely dry.
• Do not dry the filter in a tumble dryer, microwave, oven or near a naked flame.
• The filter should be washed at least once a month.

• Leave the filter to dry in a warm place for at least 12 hours or until completely dry.
• Replace the filter and re-assemble the machine.

NB To fit the filter correctly the filter should be pushed firmly into place as shown below.

Has this resolved the problem?

• Yes
• No
• Back