Check the brushbar

Turn power off and unplug the machine.

Step 1 - Removing the cleaner head

• Lay the machine on its back.

• Pull the red release catch away from the cleaner head and remove the cleaner head as shown below.

Step 2 - Opening the soleplate

• Place the cleaner head on a flat surface, brush side down.
• Pivot the two red levers up and out towards the end of the cleaner head until they click.
• Hinge the soleplate open.

Step 3 - Clearing the brushbar

NB: Beware of sharp objects when clearing obstructions.

• Clear any hair or debris from the brushbar and cleaner head.

Step 4 - Refitting the soleplate and cleaner head

• Hinge the soleplate closed and pivot both levers back into position so they are flush with the surface of the cleaner head.
• Fit the cleaner head back onto the connections as shown below.
• Push firmly until the cleaner head clicks into place and the red latch engages.

• No
• Brushbar not spinning
• Yes
• Back