Assembling your Dyson machine

• Lay the machine on its back and fit the cleaner head onto the connections as shown below.
• Push firmly until the cleaner head clicks into place and the red latch engages.

• Stand the machine upright.
• Push the wand and handle assembly into the top of the hose until it 'clicks'.
• Press the red wand release button and push the wand fully into the hose.
• Place the wand and handle assembly into the grooves on the top of the duct as shown below.
• Press the red handle release button and push the wand and handle assembly down fully.

• To fit the tool holder, first remove the cyclone and clear bin assembly.
• Slide the tool holder onto the back of the machine, just above the ball, as shown below.
• Press the tool holder on with your thumbs, while holding the front of the machine with your fingers.  The fitting is tight, so use a constant, firm pressure.
• Refit the cyclone and clear bin unit.
• Attach the tools.

NB: The tool holder is not designed to be removed once fitted.

• Did you find this useful?

  
  Yes
• No
• Back