Removing blockages
Remove the Turbine head
- Remove the Turbine head from the extension tube by pressing the release catch on the end of the extension tube.
Check the Turbine head openings
- With the Turbine head removed, check the openings on the tool for blockages and remove if necessary.
Unlock the brushbar endcap
NB: Beware of sharp objects when checking for blockages.
- If you cannot clear an obstruction you may need to remove the brush bar.
- Use a coin to unlock the fastener marked with a padlock.
Remove the brushbar
- Carefully remove the brushbar and clear any debris.
Refit the brushbar
- Replace the brush bar and secure it by tightening the fastener.
- Ensure it is fixed firmly before operating the appliance.
- Re-fit the Turbine head and test the machine.
Check the extension tube, wand handle and hose
- Separate the extension tube from the wand handle by pressing the release catch on the wand handle.
- Remove the wand handle from the hose by pressing the release catch on the hose.
- Press the release catch and remove the hose from the appliance.
NB: Beware of sharp objects when checking for blockages.
- Check the extension tube, wand handle and hose for blockages; remove as necessary.
The cyclone, bin, duct and hose inlet
- Remove the bin and cyclone assembly.
- Check the cyclone, bin, duct grille and hose inlet for blockages; remove as necessary.
The inspection hose
- To access the flexible inspection hose beneath the clear bin, first remove the clear bin (see above).
- Unscrew the two Phillips screws on the clear bin locator bracket. (Do not remove any other screws.) Remove the bracket.
- Firmly twist the flexible inspection hose away from the inlet next.
- Inspect for blockages and remove as necessary.
- Refit the flexible inspection hose and clear bin locator bracket.
Rebuild and test the machine.