Dyson DC54 Support - Quick start guide, step by step | Dyson.com.au
DC54 Animal Pro
DC52 Animal Turbine

Contact us

Our customer care team is available Mon-Fri from 8:00am to 6:00pm and Sat-Sun 8:30am - 4:00pm AEST.

Please note: Our Contact Centre is experiencing heavy call volumes and we apologise for the delay. We are working to bring our wait times back to normal as quickly as possible.

 

Quick start guide, step by step

What's in the box?

  1. Main body.
  2. Wand, extension tube and hose.
  3. Combination tool, stair tool and tool holster.
  4. Turbine head and instruction manual.

 

Assembling your Dyson machine

  • Attach the hose to the hose inlet on the front of the machine.
  • Clip the hose to the rear of the wand handle.
  • Clip the wand handle to the extension tube.
  • Press the release catch on the extension tube to extend, ensuring it 'clicks' into place.
  • Attach the Turbine head to the extension tube.
  • Insert the tools into the holster and attach to the extension tube as shown below.

 

Using the extension tube

  • Press the release catch on the extension tube to extend, ensuring it 'clicks' into place.

Diagram of using the extension tube

 

 

The accessory tools

  • Attach the accessory tools to the wand handle or extension tube ensuring they 'click' into place.
  • Alternatively, remove the extension tube and wand handle and attach the accessory tools directly to the hose ensuring they 'click' into place.

 

Using the suction release trigger

  • To reduce the suction pull the release trigger as shown below.

Diagram of using the suction release trigger

 

Emptying the clear bin

Step 1 - Remove the clear bin and cyclone

  • Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
  • To remove the cyclone and clear bin, push the release button to the side of the carrying handle, as shown. The carrying handle will be released. Remove the cyclone and clear bin unit.

 

Step 2 - Empty the bin

  • To release the dirt, press the red bin release button.

 

NB: To minimise dust/allergen contact when emptying, encase the clear bin tightly in a plastic bag and empty. Remove the clear bin carefully. Seal the bag tightly, dispose as normal.

 

Step 3 - Close the bin base

  • Close the clear bin base so that it clicks into place and is secure.

 

Step 4 - Replace the bin and cyclone

  • Place the clear bin and cyclone into position on the front of the main body. The recess in the base of the clear bin must fit onto the lug on the locator bracket.
  • Push the carrying handle down so it clicks into place on the top of the clear bin and cyclone ensuring it is secure.