Air is continuously running from the hand dryer

• Check for any foreign objects in the sink and remove if necessary.
• Ensure sensors are clean and free from any obstructions.

• Inspect filter and change if required.

• Ensure that the hose is securely attached to the base of the tap and no leaks are present.

1. Plug the communications cable in the hose into the connector in the backplate as shown. Check the orientation of the connector – the two tabs must be lined up. Ensure the cable is correctly routed in the channel in the backplate.
2. Clip the hose into the backplate.

• Download filter change guide
• Installing your Dyson Airblade Tap hand dryer

•  

  Has this resolved the problem?

  
  Yes
• No
• Back