Dyson Airblade Tap hand dryer - There is no air coming from the hand dryer | Dysonairblade.com.au
Airblade Tap Wash + Dry Short

Contact us

Our customer care team is available Mon-Fri 8:00am - 6:00pm EST, Sat-Sun 8:30am - 4:00pm EST.

 

There is no air coming from the hand dryer

  • Turn the unit off and on.
  • Check fuse/circuit breaker is working and that the power is connected.
  • Ensure sensors are clean.

  • Ensure that the air hose is securely arrached to the base of the tap and no leaks are present.
  • Check that the sensor cable from the tap is securely connected.

  1. Plug the communications cable in the hose into the connector in the backplate as shown. Check the orientation of the connector – the two tabs must be lined up. Ensure the cable is correctly routed in the channel in the backplate.
  2. Clip the hose into the backplate.