Removing blockages from the Soft roller floor tool
Step 1 - Removing the floor tool from the wand
- Disconnect the floor tool from the wand by pressing the release button.
Step 2 - Unlocking the brushbar end cap
NB: Beware of sharp objects when checking for blockages.
- If you cannot clear an obstruction you may need to remove the brushbar.
- Turn the floor tool upside down so the underside of the floor tool is facing you.
Use a coin to unlock the fastener marked with a padlock.
Step 3 - Removing the brushbar
NB: This product has carbon fibre brushes. Take care if coming into contact with them,
as they may cause minor skin irritation. Wash your hands after handling the brushes.
- Rotate the end cap to the open position.
- Gently slide the large brushbar away from the floor tool.
Remove the end cap from the brushbar.
Step 4 - Clear any debris
- Carefully clear any debris from the brushbar.
Step 5 - Refitting the brushbar
- Slide the large brushbar back onto the floor tool, around the motor.
The end cap should be in the open position as shown.
- Once in place, rotate the end cap back into the closed position.
Step 6 - Locking the brushbar end cap
- Close the fastener by turning a quarter turn clockwise. Ensure that the fastener is
fully turned and the base plate and the brushbar is secure.
- Re-fit the cleaner head and test the machine.
