Quick start guide, step by step
What's in the box?
- Main body, battery, cyclone and clear bin fully assembled.
- Motorised floor tool.
- Wand.
- Mini motorised head.
- Crevice tool
- Combination tool.
- Charger.
- Dock.
- User guide.
How to charge the machine
The machine can be charged on the dock or by plugging the charger directly to the machine as shown below.
The light on the charger will show when the machine is being charged and will go out when fully charged.
Option 1
 |
 |
 |
 |
| Charging. |
Fully charged. |
Not charging - too cold/too hot. |
Not charging - contact Dyson helpline. |
Option 2
| Attaching to docking station. |
Removing from docking station. |
 |
 |
- Plug the charger into a wall socket.
- The battery should be fully charged after 3.5 hours
|
|
|
|
| Charging. |
Fully charged. |
Not charging - too cold/too hot. |
Not charging - contact Dyson helpline. |
Attaching the accessory tools
- Slide the accessories into the inlet pipe on the bin assembly until they 'click' into position.
How long will my machine run for?
Your Dyson handheld is designed to give constant suction. When fully charged your Dyson handheld will give between 6 to 20 minutes of powerful constant suction depending on the power mode and tool selected.
To change the mode, hold the trigger down and press the max button.
How to empty the clear bin
- Empty as soon as the dirt reaches the level of the MAX mark – do not overfill.
- Ensure the appliance is disconnected from the charger before emptying the clear bin. Be careful not to pull the 'ON ' trigger.
- To release the dirt, push the red button by the clear bin downwards to release dust directly into a dustbin.
- To remove debris from the shroud, remove the bin by pressing the red button twice.
- Close the clear bin base so it clicks into place and is secure.
